Leica SE Instruções de Operação descarregar pdf (Página 43)

4140

BRACKETING

The following are available:

- 2 numbers of pictures: 3 or 5

- 4 graduations: 0.5EV, 1EV, 2EV and 3EV

Setting the function

1. In the

CAMERA menu (see p. 16/26), select Exp. Bracketing (5.5).

• The submenu appears in the monitor, containing the three options

Num-

ber of Frames

, Aperture Stops and Automatic, with a scale below.

If an exposure compensation is set at the same time, this is indicated by

a corresponding value below the scale.

2. For

Number of Frames, turn the click wheel (1.18) or press the joystick

(1.17) to the left or right to select whether you want to take a bracketing

exposure series and the number of pictures.

• White triangles appear above the selected graduations on the scale,

shown in red. They indicate the relevant exposure values.

Note:

If an exposure compensation is set at the same time, the zero exposure, i.e.

the starting point of the bracketing series, corresponds to the compensated

exposure value in

, and exposure modes (see . p. 44/45).

3. Conﬁrm the setting by pressing the click wheel or the joystick inwards, up

or down.

• The setting for

Aperture Stops is highlighted as ready for editing.

4. Select the desired graduation by turning the click wheel or pressing the

joystick to the left or right.

• The intervals and triangles displayed change positions according to the

selected graduation.

Note:

• If the bracketing series exceeds the range of ±3EV - due to the combination

of number of pictures and graduation - the scale division changes from

±3EV to ±6EV. The intervals and triangles displayed adjust accordingly.

• Note that both settings have to be made and conrmed, otherwise the

function will not be active.

5. Conﬁrm the setting by pressing the click wheel or the joystick inwards, up

or down.

• The setting for

Automatic is highlighted as ready for editing.

6. Turn the click wheel or press the joystick to the left or right to select the

desired setting,

On for an automatic series of exposures after releasing the

shutter once,

Off for an individual shutter release for each picture.

7. Conﬁrm the setting by pressing the click wheel or pressing the joystick

inwards.

• In the initial menu list, a set bracketing series is indicated by

XEV /X

8. All pictures are produced by pressing the shutter release button once or

several times.

The viewﬁnder shows

• the corresponding warning symbol (2.8)

• the changing displays for shutter speed (2.2) and aperture (2.4) depending

on the graduations

The top panel display shows

• next to the exposure mode

+ before

the overexposed pictures,

0, before the uncorrected picture,

and

- before the underexposed pictures(3.9)

• the display for a bracketing series (3.14b)

The monitor shows (for picture data display, see p. 12)

• the corresponding symbol (4.1.27)

Example, ﬁrst "X" stands for the graduation, the second for the number of pic-

tures

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 76 77

Comentários a estes Manuais

Sem comentários

Leica SE Instruções de Operação Página 43

Comentários a estes Manuais

Manuais e produtos relacionados com Medição, teste e controlo Leica SE