Leica SE Instruções de Operação descarregar pdf (Página 38)

Note:

The functions and settings described in the next two sections refer exclu-

sively to pictures in one of the JPEG formats. If one of the two DNG ﬁle

formats is set, these menu functions are not available.

Changes can be made later on a computer.

Picture properties/Contrast, sharpness, color saturation

All three picture properties can be adjusted – independently - to three dif-

ferent levels using the menu, so that you can set the optimum values for any

situation, i.e. the prevailing lighting conditions. In the case of

Saturation also

B & W can be selected as a fourth option.

Setting the functions

1. In the

IMAGE menu (see p. 16/26), select Contrast (5.15), or Sharpness

(5.16), or

Saturation (5.17), and

2. then the desired level (

Low, Standard, High) in the submenu.

Working color space

The Leica S allows you to set one of three color spaces -

sRGB, Adobe RGB or

ECI RGB.

Setting the function

1. In the

IMAGE menu (see p 13/26), select Color Management (5.14), and

2. then the desired function in the submenu.

Storing picture data / memory card management

If two memory cards are inserted (see p. 21), on the Leica S you have the

option of selecting,

- whether picture data is to be stored on one of the two cards ﬁrst until its full

capacity is reached and then on the other card -

Sequential, or

- always to both cards simultaneously -

Parallel, or

- whether picture data is to be transferred directly to a computer connected

by a cable -

External.

Setting the function

1. In the

SETUP menu (see p. 17/26), select Data Storage (5.18), and

2. then the desired function in the submenu.

Notes:

• If

Sequential is selected:

- The picture data is ﬁrst stored on the CF card and, once its capacity has

been reached, on the SD/SDHC/SDXC card.

- If only an SD/SDHC/SDXC card is inserted, the picture data is stored

there.

• This applies regardless of the set data formats (see p. 32).

Parallel and both ﬁle formats are selected:

- The DNG data is always stored on the CF card and the JPEG data on the

SD/SDHC/SDXC card.

• If only one card is inserted (regardless of which), all picture data is stored

on it.

• As soon as the camera is connected to a computer, it switches automat-

ically to

External, and reverts back to the original setting as soon as it is

disconnected again.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 76 77

Comentários a estes Manuais

Sem comentários

Leica SE Instruções de Operação Página 38

Comentários a estes Manuais

Manuais e produtos relacionados com Medição, teste e controlo Leica SE