Leica SE Instruções de Operação descarregar pdf (Página 39)

RECORDING MODE

SHUTTER RELEASE BUTTON

The Leica S has a three-stage shutter release button (1.1):

1. Brieﬂy tapping it activates the distance and exposure metering systems, as

well as the displays in the viewﬁnder and on the top panel.

Holding the shutter release button at this pressure point keeps the meter-

ing systems and displays active.

When the shutter release button is released, the metering systems and

displays remain active for around 12s.

Notes:

• If review mode was previously set (see p. 56), tapping the shutter release

button switches the camera back to recording mode, and if it was previous-

ly in standby mode (see p. 30), it is reactivated, i.e. metering systems and

displays are turned on.

• The shutter release button is locked

- if the internal buﬀer memory is temporarily full, e.g. after a series of pic-

tures (also applies if no memory card is inserted), or

- if the memory card(s) inserted is/are full.

2. Pressing the shutter release button to the pressure point and holding

it in this position stores the metered exposure value for spot and cen-

ter-weighted metering in

, and modes (see p. 44/45). When using

autofocus in

AFs - Sharpness priority - mode (see p. 37) the focus setting

is saved at the same time. Letting go of the shutter release button enables

new measurements to be carried out.

Note:

You can also use the menu to set the joystick (1.17) to store the metered

exposure value and/or the automatic focus setting (see p. 39).

3. Pressing further releases the shutter or starts any preselected self timer

delay time (see p. 46).

Series exposures

You can not only use the Leica S to take single pictures but also to produce a

series of pictures.

Setting and using the function

1. In the

CAMERA menu (see p. 10/26), select Drive Mode (5.1), and

2. then

Continuous in the submenu.

3. The subsequent function is then determined by how you operate the shut-

ter release button:

- A series of pictures is taken for as long as you hold the shutter release

button all the way down (and the capacity of the buﬀer memory or the

memory card(s) is suﬃcient).

- If you press the shutter release button brieﬂy, the camera continues to

take single pictures.

Notes:

• The camera's buer memory only allows a limited number of pictures to be

taken in a series (see p. 73). When you press the shutter release button to

the pressure point or during a series of pictures, the display in the viewﬁnd-

er (2.10a) indicates how many (more) pictures are possible in a series.

• Regardless of how many pictures have been taken in a series, both review

modes (see p. 56) initially show the last picture in the series or the last

picture in the series saved on the currently active card (see p. 60), if not all

of the pictures in the series have been transferred from the internal buﬀer

memory to the relevant card yet.

Details of how to select the other pictures in the series and further options

in the review modes are described in the corresponding sections starting

on p. 56.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 76 77

Comentários a estes Manuais

Sem comentários

Leica SE Instruções de Operação Página 39

Comentários a estes Manuais

Manuais e produtos relacionados com Medição, teste e controlo Leica SE